Revolutionary cleaning, lubricating and preservative mean for category weapons CLP (One Step - Clean Lubricate Protect) - liquid


Omlouváme se, ale bohužel v této kategorii nejsou momentálně žádné produkty

ArmyCor is a fair yellow to slightly brown liquid with low viscosity. It is a mixture of highly refined liquid hydrocarbons, anticorrosion inhibitors, special lubricants and other additives. ArmyCor is a new generation of protective product primarily designated for professional gun care. It ensures the best protection against dirt, wear and moisture (including salt water). ArmyCor is a universal formula and can be used whenever you are looking for the professional care for metal components. CLP incorporates three basic functions: it disperses metal residue from bullets in barrels, removes sediments and gunpowder residue, and dissolves previous preservatives and applied lubricants. At the same time it applies a thin micro-layer of unique lubricants, corrosion inhibitors and anti-adhesive agents. Special technology used in ArmyCor provides MAXIMUM removal of friction between moving components. It ensures medium-term protection against corrosion.  CLP formula dries off completely, leaving the protected surface grease-free. The first shot after using ArmyCor is affected minimally thanks to the protective micro-film. Repeated use of ArmyCor ensures considerably easier maintenance. This product was developed in accordance with and adheres to MIL-PRF-63460E. ArmyCor has two drying phases: In the first phase, when the product has a very low viscosity, it spreads into every fold and gap and intensively removes dirt from your gun’s surfaces. In the second drying phase, the viscosity increases and the grease and dirt is solvated and can be wiped away with absorptive cloth easily and without any haste.

  • Tested by professional units.
  • High cleaning efficiency
  • Excellent clinginess, the product also gets into poorly accessible places
  • Removes previously used preservatives and lubricants
  • Micro-layer special lubricant reduces friction of the various moving parts to a minimum level
  • The product repels water and protects against corrosion
  • Protects against dust
  • Removes and prevents oxidation
  • It does not contain teflon or silicone lubricants
  • Operating range: -50 / +258 ° C (-58 / +496 ° F)
  • Low consumption, about 30 ml per 1m2
  • Long-term efficiency and protection
  • Meets the requirements and specification MIL-PRF-63460

Custom package
50 ml bottle sprayer, 200 ml and 400 ml aerosol spray, 1 litre bottle,  5 l and 25 l can, 200 l barrel


ArmyCor is applied directly to the cleaned surface or with a clean and absorptive fiberless cloth or other material. Small parts can be completely immersed into the product. If absorptive cloth or other material is used, simply wipe the surface with it. It is desirable to let the formula work for a few minutes and then wipe any dissolved and dispersed dirt away. At the end, wipe the surface with a clean cloth soaked in ArmyCor once more. Cloths and other materials should not dribble when pressed. However, dry absorptive materials may wipe the protective formula away from the gun completely. Please let the gun DRY OUT before placing it back to its case !!! 

Putting the gun in a plastic foam case before it has dried out may neutralize the preservative component of the product!!! The manufacturer is not liable for any damage caused by not complying with the technological procedure of application.

ArmyCor has a high degreasing effect in its first phase. We recommend using petroleum resistant gloves during work and reparation cream afterwards. Skin may crack after being degreased. The product is a class 2 flammable material. Do not smoke and prevent creating sparks. Do not inhale the vapor when using mechanic or pressurized spray.

Use the liquid within 24 months from production date. Use the aerosol spray within 36 months from production date. Store in original and well-sealed plackage at temperature of 5 - 30 °C, protect from sunlight and frost. During storage, the principles of working with Class II combustibles must be observed.


Labeling in accordance with EU Regulation. No 1272/200

WARNING  H225 Higly flammable liquid and vapour H304 May be fatal if swallowed or enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects P210 Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. P301+P315 IF SWALLOWED: get immediate medical advice/attention P331 Do NOT induce vomiting. P305+P351+P338 IF IN EYES: Rinse cautiously for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P337+P313 IF EYE IRRITATION PERSISTS: Get medical advice/attention P302+P352 IF ON SKIN: Wash winth plenty of soap and water. P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in position comfortalble for breathing. P102 Keep away from children.. P501 Dispose contents/container to approved  waste disposal plant.. Contains: Dodekan; n-undecane; > 30% of aliphatic hydrocarbons.

Při poskytování našich služeb nám pomáhají soubory cookie. Využíváním našich služeb s jejich
používáním souhlasíte. Další informace